Image 1 of 1
Image 1 of 1
Image 1 of 1
Image 1 of 1
Lavor PT70ss Plus diesel heater, the fuel filter is a critical secondary line of defense for that .040 nozzle. Given the tight tolerances of the nozzle orifice, the filter must meet specific filtration densities to prevent microscopic carbon or sediment from causing a blockage.
To match your requirements for a 6mm hose and a 45–60 μm filtration rating, the following specifications apply:
Hose Compatibility: 6mm (approx. 1/4") ID (Internal Diameter) fuel line.
Maximum Pore Size: $\le 60 \text{ \mu m}$ (Microns). This ensures that no particles large enough to immediately clog the .040 nozzle pass through.
Average Pore Size: $\le 45 \text{ \mu m}$ (Microns). This provides the "fine" filtration necessary for the high-pressure pump system.
Material: Typically a sintered bronze or high-density mesh element. Sintered bronze is preferred for these heaters because it is depth-loading and can handle the suction pressure of the fuel pump without collapsing.
PRODUCT CODE PIS75.023.0285
Lavor PT70ss Plus diesel heater, the fuel filter is a critical secondary line of defense for that .040 nozzle. Given the tight tolerances of the nozzle orifice, the filter must meet specific filtration densities to prevent microscopic carbon or sediment from causing a blockage.
To match your requirements for a 6mm hose and a 45–60 μm filtration rating, the following specifications apply:
Hose Compatibility: 6mm (approx. 1/4") ID (Internal Diameter) fuel line.
Maximum Pore Size: $\le 60 \text{ \mu m}$ (Microns). This ensures that no particles large enough to immediately clog the .040 nozzle pass through.
Average Pore Size: $\le 45 \text{ \mu m}$ (Microns). This provides the "fine" filtration necessary for the high-pressure pump system.
Material: Typically a sintered bronze or high-density mesh element. Sintered bronze is preferred for these heaters because it is depth-loading and can handle the suction pressure of the fuel pump without collapsing.
PRODUCT CODE PIS75.023.0285